UNIMIX

UNIMIX is an innovation in the panorama of floor-mounted system adjustment groups. This mixing system sets the temperature of the fluid in the primary circuit (boiler) to the adjustable value required in the secondary circuit (heating panel). UNIMIX is a modular group that can be connected directly and easily to our manifolds for panelled plant. Using a circulator with 130 mm centres allows connection to our manifolds mounted on supports with 200 mm centres, while a circulator with 180 mm centres requires the use of 250 mm brackets (Article AC 611). The system can be easily powered from the side or from below by means of our angle ball valves AC 643 NB / AC 643 NR, thereby ensuring for installation technicians convenient assembly in all possible configurations. The versatility of this group is highlighted in the case of mixed-circuit systems: high temperature (radiator system) and low temperature (panelled heating system).

This is the classic example in homes with floor general heating and bathroom radiators (towel warmers, etc.). To implement this system, simply connect to the UNIMIX inlet the new high temperature distribution kit including fill-empty cocks, delivery and return manifolds with simple branches for radiators, the over-pressure differential valve.
There are two different high temperature systems:
1.  High temperature kit with micrometric balancing valves and electro-thermal  heads  driven inserts with Eurokonus off-takes. Those kits are also available complete of  straight or angle ball valves for the connections to the primary circuit.
2.  High temperature simple distribution manifold  with Eurokonus off-takes. Those kits are available also complete of  straight or angle ball valves for the connections to the primary circuit.
The UNIMIX system provides for the following two operating modes:
a.  With fixed point adjustment by means of a thermostatic actuator, with an immersion probe and a temperature range of 30°C to 50°C;
b.  With a flow temperature adjustment which varies based on the thermal load. The system can be equipped with 24 VAC axial movement motors (art. SRV 24) with driving voltages of 0-10 V, or a 24 VAC 0-10V thermoelectric type motor (art. TE 3061). Both can be piloted through the WLM2-1FS electronic adjustment control unit, with external temperature compensation and an integrated wiring centre for zone adjustment by means of thermoelectric actuators mounted upon the distribution manifolds. Another possible solution is the application of the NRV 230 axial servo-motor with 3-point adjustment, managed by the LAGO BASIC climate control unit. In this case, zone adjustment can be performed through the thermoelectric on/off actuators using the ALC01 Wiring Centre, which provides for the individual management of up to 8 independent zones.